Remove plastic protector cap protecting the gland se-
　　　　　　　　aling surfaces. Go to STEP2A for Retainer Assembly,
　　　　　　　　other go to STEP2B.

 

 

 

 

　　　　　　　　Place retained gasket over gland face. Be careful not to
　　　　　　　　scratch or nick sealing surface as this could affect
　　　　　　　　performance.

 

 

Place gasket into female nut.

 

 

Assemble components and snug to fingertight.

 

 

Mark the hex flat on both the male and female nuts.

 

 

　　　　　　　　Holding the backup wrench stationary, tighten the
　　　　　　　　female nut 1/8 turn past fingertight.